Ure 9. Young’s The mechanical properties of were evaluated and had been just about the same at approxmoduli of HPC-based hydrogels had been evaluated and have been practically the same at imately of HPC-based elasticity of HPC-based hydrogels was comparable to exact same of a moduli 0.1 MPa. The hydrogels of HPC-based hydrogels was practically the that at roughly 0.1 MPa. The elasticity were evaluated and were comparable to that of commercially offered hydrogel for soft make contact with lenses [5]. Also, it’s important aapproximately 0.1 MPa. The elasticity of HPC-based hydrogels was comparable to that of commercially out there hydrogel for soft speak to lenses [5]. Also, it is important suitable balance among break beato have anappropriate balance involving the tensile Immunology/Inflammation| strength and elongation atat break to commercially out there hydrogel for soft contact lenses [5]. Furthermore, it is important have an the tensile strength and elongation lead to the appropriate balance amongst the tensile strength and to possess ansoft contact lenses are handled manually. The relationship between the tensile since the soft make contact with lenses are handled manually. The partnership elongation at break among the tensile strength and elongation at break with the HPC-based The partnership in between the 10. As for the reason that andsoft make contact with lenses are handled manually. hydrogels is shown in Figuretensile the elongation at break from the HPC-based hydrogels is shown in Figure ten. As strength previously described, the tensile strength and elongation strength and elongation tensile strength and elongation at break on the hydrogels had been hydrogels is in the in Figure have been previously described, the at break on the HPC-based breakat breakshown hydrogels 10. As enhanced adding previously byadding 23G to HPC. The elongation at at breakbreak additional enhanced by described,23G tensile strength and elongation was was of your hydrogels have been the to HPC. The elongation at additional enhanced by adding improvedto HPC/23G, which reached 125 . As a result, the HPC/23G/HEMA hydrogel HEMA by enhanced by to HPC/23G, which The elongation As break wasthe HPC/23G/HEMA to HPC. reached 125 . at a outcome, further improved by adding HEMAadding 23G fantastic balance between the tensile strength and also the elongation obtained at 50 kGy had a adding obtained HPC/23G,had a reached 125 . Consequently, the HPC/23G/HEMA which hydrogelHEMA to at 50 kGy tensile great balance amongst the tensile strength and125 . at break, which exhibited a strength of 0.2 MPa and elongation at break in the hydrogel obtained whichkGy had aagood balance betweenMPa and elongation at break at 50 exhibited tensile strength of 0.two the tensile strength along with the elongation at break, about two.0 and 1.eight instances when compared with the HPC hydrogel with out 23G These values have been elongation at values were about a and strength in comparison to elongation at break ofand HEMA, break, which exhibited2.0tensile1.8 occasions of 0.2 MPa andthe HPC hydrogel 125 . These respectively. Thus, the addition from the crosslinker 23G improved the of 125 . These values and 1.8 occasions in comparison to the HPC hydrogel without strength with an had been about two.0 Therefore, density and elevated the elongation at tensile 23G and HEMA, respectively.crosslinking the addition in the crosslinker 23G increase inside the without the need of 23G tensile strength with a rise in thethe addition of your crosslinker 23G and HEMA, respectively. Therefore, crosslinking density and improved enhanced the enhanced the at break by introducing a p.
